HIGH EFFICIENCY HIGH HEAT
CARRIER 10 TON
GAS/ELECTRIC COMMERCIAL PACKAGED UNIT
Model # 48HCTD11A1A6-0A0A0
460-VOLT 3-Phase R410A 250,000 BTU
Included Options: Stainless steel high heat model.
|
Nominal Cooling
Ton Size
|
Cooling
Stages |
Dimensions (in.)
L x Wx H |
Gas Heating
Input (MBtuh)
|
Approx. Unit
Weight (lb) |
| 10 |
2 |
88 x 59 x 49 |
250,000 |
1100 |
Performance Features
- ASHRAE 90.1 and Energy Star compliant
- Up to 15.6 SEER, 13.0 IEER, and 12.2 EER
- Gas efficiencies up to 82%
- Standard cooling operating range up to 125 °F (52°C) and down to 35°F (-2°C). Low ambient controllers can bring cooling operation down to -20°F (-29°C)
- Innovative non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
- Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
Maintenance Features
- Control terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
- Access panels with easy grip handles and tool-less filter access door
- Innovative, easy starting, no-strip screw feature on unit access panels
- Optional hinged access panels also available
- Belt drive evaporator-fan motor and pulley combinations available on all three phase models to meet any application
- Electric Drive x13 (5 speed/torque) motor on 04 to 06 models
- Two-inch disposable return air filters
Installation Features
- Same footprint as installed Carrier 3-5 and 7.5-10 ton rooftops back to 1989, reducing installation costs and time
- Field convertible from vertical to horizontal airflow for slab mounting (sizes 04 to 14)
- Provisions for thru-the-bottom power entry capability as standard
- Single point gas and electric connections
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Dedicated vertical and horizontal airflow models available (factory option on size 17 to 28 units)
Reliability Features
- Scroll compressors with internal line-break overload protection
- 24-volt control circuit protected with resettable circuit breaker
- Permanently lubricated evaporator-fan motor
- Totally enclosed condenser motors with permanently lubricated bearings
- Low pressure and high-pressure switch protection
- Exclusive IGC anti-cycle protection for gas heat operation
- Solid-state electronic direct spark ignition system and flame roll-out safety protector
