CARRIER 5 TON RTU PACKAGED UNIT 208/230V 1-PH HEAT PUMP 50KCQA06A0A30A0A0
CARRIER 5 TON RTU PACKAGED UNIT 208/230V 1-PH HEAT PUMP 50KCQA06A0A30A0A0
CARRIER 5 TON RTU PACKAGED UNIT 208/230V 1-PH HEAT PUMP 50KCQA06A0A30A0A0
CARRIER 5 TON RTU PACKAGED UNIT 208/230V 1-PH HEAT PUMP 50KCQA06A0A30A0A0
CARRIER 5 TON RTU PACKAGED UNIT 208/230V 1-PH HEAT PUMP 50KCQA06A0A30A0A0

CARRIER 5 TON RTU PACKAGED UNIT 208/230V 1-PH HEAT PUMP 50KCQA06A0A30A0A0

$6,129.99 $4,999.99 Sale

CARRIER 5 TON
GAS HEAT
COMMERCIAL PACKAGED UNIT 
Model #50KCQA06A0A30A0A0
208/230-VOLT     1-Phase    R410A

 

Nominal Cooling
Ton Size

Cooling
Stages

AHRI Efficiency
(SEER) EER

Dimensions (in.)
L x Wx H

Approx. Unit
Weight (lb)

5

1

(14.2)

74 x 47 x 41

610


WeatherMaker® Standard Efficiency Single-Packaged Rooftop Units
50KCQ

Heat Pump Units

WeatherMaker® 50KCQ rooftop units were designed to be easy to install, maintain, and operate, with customer-requested features including a gage port, centralized control center, plug-and-play accessory board, "no-strip screw" collars, and handled access panels. Units are field-convertible to horizontal airflow without special adapter curbs or kits, making it easy for the installer to adjust to unexpected jobsite complications. Units are pre-wired and pre-charged with Puron (R-410A) refrigerant and are factory tested.

Performance Features

  • ASHRAE 90.1 compliant
  • Single-stage cooling capacity control
  • Up to 14.3 SEER, 12.2 EER and 8.2 HSPF
  • Cooling operating range up to 115 °F (46°C) and down to 25°F (-4°C) using winter start kit
  • Innovative non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
  • Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection

Maintenance Features

  • Control terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
  • Access panels with easy grip handles
  • Innovative, easy starting, no-strip screw feature on unit access panels
  • Direct Drive – ECM indoor fan motor standard with optional belt drive systems available
  • Two-inch disposable return air filters

Installation Features

  • Same footprint as installed Carrier 3-5 ton rooftops back to 1989, reducing installation costs and time
  • Field convertible from vertical to horizontal airflow configuration
  • Provisions for thru-the-bottom power entry capability as standard
  • Single point gas, electric, and controls connections
  • Full perimeter base rail with built-in rigging adapters and fork truck slots

Reliability Features

  • Scroll compressors with internal line-break overload protection
  • Compressor crankcase heaters (sizes 05 to 06 sizes)
  • 24-volt control circuit protected with resettable circuit breaker
  • Permanently lubricated evaporator-fan motor
  • Totally enclosed condenser motors with permanently lubricated bearings
  • Low pressure and high-pressure switch protection
  • Liquid line filter drier as standard