CARRIER 8.5 TON
GAS/ELECTRIC COMMERCIAL PACKAGED UNIT
Model # 48TCEM09A2A5-0F0A0
208/230-VOLT 3-Phase R410A 224,000 BTU
2019 Model!
Included Options: Enthalpy Economizer
|
Nominal Cooling
Ton Size
|
Cooling
Stages |
Dimensions (in.)
L x Wx H |
Gas Heating
Input (MBtuh)
|
Approx. Unit
Weight (lb) |
| 8.5 |
2 |
88 x 59 x 49 |
224k |
930 |
GAS HEATING / ELECTRIC COOLING
PURON® (R-410A) REFRIGERANT
48TC WEATHERMAKER® rooftop units were designed by customers for customers. With a gauge plug, centralized control center, plug & play accessory board, “no-strip screw” collars, and handled access panels, we’ve made the unit easy to install, easy to maintain, and easy to use. Units are pre-wired and pre-charged with environmentally sound Puron® (R-410A) refrigerant at the factory. The units are factory tested in both heating and cooling modes.
Performance Features
- ASHRAE 90.1 compliant
- Up to 13.0 SEER, 11.8 IEER, and 11.1 EER
- Gas efficiencies up to 82%
- Cooling operating range up to 115 °F (46°C) and down to 25°F (-4°C) using winter start kit
- Innovative non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
- Exclusive IGC solid-state control for on-board diagnostics with LED error code designation, burner control logic and energy saving indoor fan motor delay
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
Maintenance Features
- Control terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
- Access panels with easy grip handles
- Innovative, easy starting, no-strip screw feature on unit access panels
- Tool-less filter access door
- Optional hinged access panels also available
- Belt drive evaporator-fan motor and pulley combinations available to meet any application
- Two-inch disposable return air filters
-
Installation Features
- Same footprint as installed Carrier 3-12.5 ton rooftops back to 1989, reducing installation costs and time
- Field convertible from vertical to horizontal airflow for slab mounting (sizes 04-16)
- Provisions for thru-the-bottom power entry capability as standard
- Single point gas, electric, and controls connections
- Full perimeter base rail with built-in rigging adapters and fork truck slots
Reliability Features
- Scroll compressors with internal line-break overload protection
- 24-volt control circuit protected with resettable circuit breaker
- Permanently lubricated evaporator-fan motor
- Totally enclosed condenser motors with permanently lubricated bearings
- Low pressure and high-pressure switch protection
- Exclusive IGC anti-cycle protection for gas heat operation
- Solid-state electronic direct spark ignition system and flame roll-out safety protector
